MN DNR to close French River Hatchery

By -
DNR to close energy-inefficient French River hatchery

A DNR News Release:
The Department of Natural Resources is closing a 1970s-era fish hatchery because of failing infrastructure and excessive energy consumption.

 The French River Hatchery, located on Lake Superior north of Duluth, needs $8 million in capital investment to address failing equipment. It also consumes 10 percent of the energy used by the entire agency statewide.

 Fisheries Chief Don Pereira said energy inefficiency and costly repairs make it necessary to close the hatchery, but the remaining fish production from French River will be continued elsewhere.

 “We remain strongly committed to providing great fishing opportunities in Lake Superior and along the North Shore,” Pereira said. “To provide the best fishing we can for anglers, we need to be strategic about how we use energy, and we’re confident we can adjust to meet angler needs with our remaining four hatcheries.”

 Pereira said production of Kamloops trout, which are raised at French River and stocked in Lake Superior, will be moved to another hatchery. The Kamloops trout is a domesticated strain of rainbow trout that cannot reproduce in the lake.

 “Kamloops provide a popular near-shore fishery for Lake Superior anglers,” Pereira said. “We will continue to produce Kamloops at another nearby hatchery until an agreed-upon strategy is reached with the Lake Superior Advisory Group, a group of anglers who work with the DNR on Lake Superior issues.”

 Under current French River operations, each Kamloop an angler keeps costs approximately $160 to produce. The hatchery is inefficient because it uses Lake Superior’s cold water and must heat the water to a temperature at which fish can be raised, a process that is less costly elsewhere.

 The French River hatchery was built in the 1970s to aid in the restoration of lake trout in Lake Superior, which at the time depended heavily on stocked fish. Today, wild lake trout have staged a healthy recovery in Lake Superior, which means the agency no longer needs to stock the fish in the big lake
.
The hatchery also produced steelhead trout, which also now have self-supporting wild populations and each year make runs up North Shore streams.

 The advisory group most recently met to give input about the soon-to-be finalized Lake Superior management plan. Pereira said closure of the French River hatchery is consistent with that plan. More information on the plan can be found at www.mndnr.gov/lakesuperior.

The DNR’s four hatcheries produce trout that are stocked in a variety of lakes throughout the state, with an inland water summer season that closed on Halloween and a winter season that opens in mid-January. A list of trout lakes can be found on the DNR website at www.mndnr.gov/fishing/trout_lakes/list.html


photos courtesy: Minnesota Steelheader

Comments

Christina said…
Are they going to open up the lower French to fishing?
12:34 PM
Post a Comment

Popular posts from this blog

Shorecasting the North Shore

By -
Image
Shore casting the North Shore of Lake Superior can at times appear to be a daunting task, it is, however, an enjoyable and very effective way to fish the big lake.  River mouths Most of us have seen the numerous fishermen lining the banks near the French or Lester rivers. Why? Because these are consistently good places to fish. A beginning shore caster would be smart to start their quest fishing river mouths, particularly early in the season when steelhead, Kamloops and lakers can be found in abundance. The river plumes provide warm water and a steady flow of bugs which fish like. Due to the fairly shallow water found at most mouths, it’s best to fish them in low light. Target these areas early in the morning and late in the evening or on a dreary overcast day. You will be less noticeable to the fish and they will be less apt to spook.  Seeing how there are over 25 potential stream/river mouths to fish it would be crazy to ignore these great areas. Fly and hardware...
Read more

Pom-Pom Eggs - The Inexpensive Glo-Bug

By -
Image
One of the most useful and productive fly patterns you can carry when you fish the runs for steelhead, kamloops and salmon are eggs. Any time free drifting eggs are in the stream is a good time to fish them and, they can be fished with any type of equipment from Fly to Spinning rods. A wise SE Wisconsin guide once told me, "Any pattern will catch fish, as long as it has an egg in it." As with all flies, you will go through A LOT of them. One option is to purchase them, but at a dollar a pop or more, making your own is a simple and inexpensive proposition. In a short amount of time and with just a few simple tools, you can crank out eggs by the hundreds at just pennies per piece. I’m going to assume that you know how to do some basic tying; but if you don’t, this is a good pattern to start learning with because it will teach you some of the basics: How to Start Your Thread , how to position materials, and the Whip Finish . On Sizing I use the metric standard because it is eas...
Read more

No Treble Hooks!

By -
Image
 Years ago all an angler had was a paper regulation booklet and the word from fellow anglers and DNR officials stating that treble hooks are not allowed in our north shore tributaries below the posted boundaries.  This should be enough, right? Today we still have those regulation booklets and honestly they have come a long way in clarifying the dos and don'ts regarding our north shore fishery.  We also have dozens of signs along our rivers explaining the dos and don't as well as specifically stating the use of treble hooks. If that was not enough, anglers can simply search the internet.  Heck, these days, you can search stream side right from your phone.  In fact this post will be available streamside to anyone willing to take the time to search the web or scan the UR code from our report cards that went out this spring. Pictured above is a photo of a a crankbait that is in many o' bass anglers tackle arsenal. Heck, I have a few myself. T...
Read more